Automatic FLOW weighing belt system
Due to its dynamic weighing belts, the system can control the production of mixed products such as mixed lettuce and salads, vegetables and cabbage mixes automatically, continuously and precisely. It is available in flexible design.

Recipe weighing belt
Automatic weighing of up to ten product components according to preset recipes – up to 99 recipe mixtures can be individually set. The weighing belt is especially designed for mixing salads and vegetables according to customised recipes.

Batch Weighing System
An automated weighing system for putting together precise salad or vegetable blends based on a recipe. The mixtures are weighed in batches but continuously conveyed along the line to optimise processing efficiency.

The post Kronen Continuous FLOW and BATCH weighing and mixing systems appeared first on Lingwood Food Services.

Options: FLEX-XL
QC-Seal system (LDPE, PP + Laminated films)
Air cooling on sealing system
Handgrip sealing system
Block bottom/gusset mechanism
Lateral film guiding system
Film splice table
Vibration unit
Bag support system
Connection for gas flushing (MAP)
Vacuum system
Perforation systems
Printing and labelling systems
Various weighing and dosing systems
Customer specific options on request

Technical specifications FLEX-XL:
Bag width (pillow) 200 – 500 mm
Max. bag length unlimited mm
Max. bag length per sealing step 480 mm
Max. production speed 20 bags/min
Film thickness 25 – 120 μ
Core diameter 76 (3”) mm
Max. film width 1.050 mm
Max. outer diameter film roll 320 mm
Voltage 230 V, 50/60Hz
Power during production 1.600 Watt
Air consumption 6 bar, 200 ltr/min
All dimensions and specifications are indications based on standard set up. Final details depend on customer specifications

The post GKS FLEX-XL appeared first on Lingwood Food Services.

Machine is standard equipped with:
Stainless steel machine construction; open design
Machine safety according to CE regulations
Stainless steel frame with PMMA cover plate over the entire film lane
Allen Bradley PLC controls and components
Photocell for bag length detection with marker on film
End of film detection
Sliding doors with bearings for optimal access
Film cut and splice table
Servo driven vacuum film pull belts
Ergonomic film roll support with film tensioning system and pneumatic film brake
Lateral film adjustment by means of automatic spindle
Servo driven sealing system model heatseal for processing
PP and laminated film

Options: FLEX-DC
Heated pneumatic support plate for keeping
the bottom seal flat
Slide-, guide-plate under sealing jaws
Vibration unit for reducing product volume
Perforation unit, pneumatical with heating
unit and controls
Length seal cooling
Air cooling on horizontal sealing bars
Thermal transfer printer
Labelling unit
MAP
Easy opening

Technical specifications FLEX-DC
Bag width (Pillow) 350 mm
Bag width Doy (max) 285 x 80 x 5 mm
Bag width Quadro (max) 200 x 150 mm
Max. bag length unlimited mm
Max. bag length per sealing step 350 mm
Max. production speed 45 bags/min
Film thickness 25 – 120 μ
Core diameter 76 (3”) mm
Max. film width 750 mm
Max. outer diameter film roll 500 mm
Voltage 400V 50/60 Hz
Power consumption 1200 Watt
Air consumption (min. 6 bar) 600 ltr/min
All dimensions and specifications are indications based on standard set up. Final details depend on customer specifications

The post GKS FLEX-DC (Doy bag and Corner Seal) appeared first on Lingwood Food Services.

Machine is standard equipped with:
Compact Stainless steel construction; hygienic design
Machine safety according to CE regulations
Allen Bradley PLC with 7” full color touchscreen and 99
programs can be created and stored
Pneumatic opening and closing of the servo driven
film pull belt
Film roll support for quick and easy film change
Low power and air consumption

Options: Easy
Mobile machine frame stainless steel with wheels Increasing ca. 335mm
Connection for gas flushing (MAP)
Gas tube in forming set
Vibration unit
Synchronization with weighing / dosing systems

Technical specifications Easy:
Bag width (pillow) 50-250 mm
Max. bag length unlimited mm
Max. bag length per sealing step 235 mm
Max. production speed 20 bags/min
Film thickness 25 – 120 μ
Core diameter 76 (3”) mm
Max. film width 540 mm
Max. outer diameter film roll 320 mm
Voltage 230 V, 50/60Hz
Power during production 1.200 Watt
Air consumption 6 bar, 150 ltr/min
All dimensions and specifications are indications based on standard set up. Final details depend on customer specification

The post GKS EASY appeared first on Lingwood Food Services.

No lubrication
100% stainless steel
Watertight bearings
Easy clean design

The fully open chassis, the watertight compartment for the protection of the lifting system where all electronic equipment is protected and the high degree of protection IP65, characterise the easy clean design. The clean rounded lines of the machine and elimination of flat surfaces and water traps along with continuous welding seams, allow deep cleaning of the equipment without affecting its operation.

The post ULMA Inoxtruck Electronic powered pallet truck EPT/PPT appeared first on Lingwood Food Services.

Now it is easy to wheel the MS100 Manual Stacker Truck across the production area to the machine and, using the correct handling attachment, simply and safely lift and remove the item. It can now be taken for cleaning, maintenance, storage etc.

Easy access to all components enables complete and thorough cleaning, to reduce the risk of microbiological build up and cross contamination. The open construction and hygienic design principles ensure the unit can always be cleaned to the highest standards.

Experts in hygienic lifting and handling systems

The post ULMA Inoxtruck Manual stacker MS100 appeared first on Lingwood Food Services.

Now it’s easy to load the film roll onto the MRS400 roll trolley and safely wheel it through the production area to the packaging machine. A quick lifting hydraulic system raises the roll to the required height and you simply, and safely, slide it onto the spindle.

Easy access to all components enables complete and thorough cleaning, to reduce the risk of microbiological build up and cross contamination. The open construction and hygienic design principles ensure the unit can always be cleaned to the highest standards.

The post ULMA Inoxtruck Bottom roll trolley MRS400 appeared first on Lingwood Food Services.

Easy access to all pallet truck components enables complete and thorough cleaning, to reduce the risk of microbiological build up and cross contamination. The open construction and hygienic design principles ensure the unit can always be cleaned to the highest standards.

The post ULMA Inoxtruck Hand pallet truck MPT15 appeared first on Lingwood Food Services.

This reduces the need for the operator to over stretch whilst handling heavy loads, thus making the working environment a safer place. The hygienic design makes the electric scissor lifter an ideal tool for the aggressive working conditions of the food industry.

The open construction and hygienic design principles ensure the unit can be thoroughly cleaned to the highest standards.

The post ULMA Inoxtruck Electric scissor lifter EXT10 appeared first on Lingwood Food Services.

Manufactured from 100% stainless steel the electronic stacker is robust, durable and hygienic. Thanks to its excellent build quality this truck requires very little maintenance and will quickly deliver a return on your investment.

The post ULMA Inoxtruck Electronic pedestrian stacker EPS appeared first on Lingwood Food Services.